Betekenis van:
high table

Voorbeeldzinnen

1. Ballasts for high intensity discharge lamps shall have the efficiency described in Table 16.
2. Ballasts for high intensity discharge lamps shall have the efficiency described in Table 15.
3. See table 4: Probability levels from high (> 50 %) to low (< 1/1 000 000)
4. High Pressure Sodium lamps with Ra ≤ 60 shall have at least the rated luminous efficacies in Table 7:
5. High pressure sodium lamps shall have at least the lamp lumen maintenance factors and lamp survival factors in Table 13:
6. This combination can be made by looking up both values in the appropriate table (see table 4); the table will provide the level of risk in terms of ‘serious’, ‘high’, ‘medium’ and ‘low’ risk.
7. The requirements in Table 7 shall apply to high pressure sodium retrofit lamps designed to operate on high pressure mercury vapour lamp control gear only 6 years after the entry into force of this Regulation.
8. Metal halide lamps with Ra ≤ 80 and high pressure sodium lamps with Ra > 60 shall have at least the rated luminous efficacies in Table 8:
9. Six years after the entry into force of this Regulation, other high intensity discharge lamps shall have at least the rated luminous efficacies in Table 9:
10. At the design stage, the minimum distance between main track centres on lines specially built or upgraded for high-speed is defined in the following table:
11. To ensure a high availability of traction, the design of the train and the calculation of its traction performance shall not make use of wheel/rail adhesion exceeding the values given in Table 21.
12. TEC Table 1 Product(s): Copiers, digital duplicators, fax machines, printers Size format(s): Standard size Marking technologies: DT, mono DS, mono EP, mono stencil, mono TT, mono high performance IJ Monochrome product speed (ipm) Maximum TEC (kWh/week)
13. As can be seen in the table under recital 109, the imports concerned were, in the IPs, 3 times as high as in 2000, i.e. an increase from 8200 tonnes in 2000 to around 25000 tonnes in the IPs.
14. the injury(ies) considered are in the highest severity levels (levels 4 or 3); the overall probability of an injury scenario is quite high (at least > 1/100). Table 4 provides further guidance in this respect.
15. As shown in the above table, the imports from other third countries lost sales volume and market share during the period considered and their prices were relatively high during the IP.